Align
Align selected entites in 2D or 3D
Align

Align selected entites in 2D or 3D, or align a group or component to a target axis system, the alignment being done based on the group/component axes.

Reviews

Pierre G.'s picture

I wish someone would explain how this tool works. I can't get any results with it.

Hi,
Found out how it works.

You first click on the object you wish to align/move, then right click and pick "Align"
- Specify the base point of the selected object
- Determine the X & Y axes in sequence for the same object [Remember you determine the axes that will match with the axes of the fixed object]
-Now specify the X & Y Axes for the fixed object.

and that's it, hope it helps!

kiwi10's picture

I would recommend people to use "s4u-align" instead.

Trying to align three cylinders - it's as clear as mud. I've used Sketchup half a dozen times or so, so:
1/ point at START Origin + red + green axis
2/ point at END Origin + red + green axis
Means nothing to me, it sounds like I need to be clicking in the centers of the round face of the cylinders but the centers aren't confirmed when waving the cursor around above the faces. In absolute laymans terms, how do you use it?

Shinnah's picture

Love this tool!

How in the world does this tool work.
It says you can do this in 2D.

I expect something like a traditional 2D align tool.
Select chape 1,
Select shape 2,
Click Left Justify, or Center Justify and BAM it should do that

It is doing things I am not 100% sure of why.
If I have two identical cubes already aligned in the Y and Z axis.
Say they are offset by 50% in the X axis, but I don't want them touching.
I simply want them to be aligned now in the X axis.
How would I select these 5 points to accomplish this.

I will play with it for another few minutes.

could you give a description of how to use this tool?

Hi,
Found out how it works.

You first click on the object you wish to align/move, then right click and pick "Align"
- Specify the base point of the selected object
- Determine the X & Y axes in sequence for the same object [Remember you determine the axes that will match with the axes of the fixed object]
-Now specify the X & Y Axes for the fixed object.

and that's it, hope it helps!

Icekarim's picture

Hi Ally
Depending on where You use the tool (Right click / Align) or menu, Align tool seems to work diffently.
I dont use it veru often but simple using right clic :
1/ point at START Origin + red + green axis
2/ point at END Origin + red + green axis

That's all
Hope I hellped you out

Using Sketchup ver. 15.3.329 and like some others, after install the Align tool does not show up in tools or elsewhere I could find.

Icekarim's picture

Hi Carl and Didier
Context menu YES

the second way to find didier's nice align tool is
1/use "Launch Up" plugin
2/Type "Bur" in the search area
3/click on Align Tool [D. Bur]

Didier
Would it be possible to access your source code ?
My dother (14) is trying to code.
I'd like her to add a function to your code : Duplicate Aligned element with sketchup move behaviour (##* or ##/)
Practicle for stairs.

Best reagards

D.Bur's picture

Even in the context menu when something is selected ?

Jarod H's picture

can you tell me how to get rid of red green and blue align component guide lines

D.Bur's picture

Hi Jarod,

Go to "Model info", click on "Components", uncheck "Display components axes" at the bottom of the dialog.

N.B.: In fact, the display of components axes should not happen because the script temporarily activates it and inactivate it at the end of the align command.
Maybe you selected a component or group to align it then cancel the command ? In this case the display of components axes is not reset to its original state (little bug...)

Jim A's picture

absolute life saver!

Mike T's picture

SketchUp 2015 update please!

D.Bur's picture

This plugin works in SU2015...

Adrian T's picture

The plugin is distributed as .rbs (Scrambled Ruby) and as such is exceedingly difficult to edit (must figure out how to decrypt it, then edit it, then re-encrypt it). As a result, the workaround listed at the Sketchucation link provided by Heracles P is more trouble than it’s worth. I suppose I’ll just stick to measuring the angle and manually rotating/moving the components into place. :(

Dan A's picture

What about sketchup 2014 ?

G MA's picture

update for SU 2014 please!!

Jacob G.'s picture

How do you use it? (After installation)

Hi,
Found out how it works.

You first click on the object you wish to align/move, then right click and pick "Align"
- Specify the base point of the selected object
- Determine the X & Y axes in sequence for the same object [Remember you determine the axes that will match with the axes of the fixed object]
-Now specify the X & Y Axes for the fixed object.

and that's it, hope it helps!

Rick M's picture

Those having difficulty with this extension system: log in first then you click [Download] which then turns into [Install]. After clicking [Install] you'll find it at the bottom of the context menu.

THEN once you've worked that out .. you now have to work out how to use it!

sela h's picture

does it show each object axis all over the model as soon as you install it to someone else or it's just me.. ? very annoying !!! can we hide those?

Salvador J's picture

Yes, over here too. I'm turning it to Sketchucation forums for help. Hope the author can come up with a fix.
By the way, anyone knows how to contact him/her? No link in the extension page.

EDIT: It's a basic tweak. Already found out. Go to Window - Model Info - Components and turn them off.

Credit goes to jaceguay at sketchucation.com.

Dem Remaerd's picture

Like it! Draw an icon. http://dem.ho.ua/img/icon_align.rar

B.E. H.'s picture

Appears just fine under Tools > Align and works great in version 14.0.4899 on OS X 10.9.2. Would be cool if you could add a button or shortcut natively, but System preferences works for now.

Jeroen V.'s picture

doesn't show in de menu BAD !!

dams p's picture

ha sireosly bed

massimo sean p's picture

BAD, Unable to install this Extension. WHY??

kientruc t's picture

i don't see

Devin L's picture

Tools menu? I see nothing...

da w's picture

You find the tool in the tools menu

Hello.
Thank you for the nice tool. I am new to SketchUp and this is the very first tool I download. I have tried using it and it looks very useful.
One question: When I select the wrong orientation for an axis, how can I go back or abort the operation so I can start over?
In one try, I selected some axes that didn't make sense and the program crashed.
Thank you.

Tools >Align.
cannot see a toolbar for it , but it could be hiding ...
How to use it .
http://sketchuppluginreviews.com/2010/06/01/align-tool-google-sketchup-p...

Where does the tool install too? Cant find it if I go to View>Toolbars.

Princefish's picture

very good!

MCA A.'s picture

Hi there,
Do you know a way to take a 2D jpg and convert to 3D componant?

Thank you,
BG
Billygo@verizon.net

richardveleda p's picture

muy bueno

31956 users
Size:
10.59 KB
Version:
1.0.1.; June 5, 2013
Number of Views: 
221699
Category: 
Industry: 
SketchUp Compatibility: 
OS Compatibility: 
Languages: 
Popularity: